Description

Mobile workstation with an extensive range of tools for fast and efficient repair work on car chassis systems, especially in the area of wheel bearings and axle suspension.
Organized storage of tools in the robust workshop/assembly trolley with oiled multiplex plywood top and four ball-bearing mounted full-extension drawers, corrosion-resistant and scratch-resistant powder-coated in GEDORE blue.
Content / range of application:
• Hydraulic cylinder 17 t (KL-0040-2500), hand pump (KL-0215-35 M25), ring ratchet/open-end wrench, impact extractor 4.8 kg (KL-0049-31), pull/pressure spindles (mechanical/hydraulic), clamping and quick-action clamping nuts as well as various adapters and drive parts for driving the tool sets.
• Articulated handle KL-4007-411 as well as power spanner/socket spanner sockets (SK / TX / XZN) for loosening and tightening of wheel bearing central screws.
• Locking ring pliers KL-0192-5 for the disassembly and assembly of wheel bearing locking rings.
• Wire brush for derusting and cleaning various components.
• Wheel hub puller KL-0041-38.. as well as wheel bearing tool kits of the KL-0041-4.. Series for pressing out and in of wheel hubs and wheel bearing units, for example on VW, Audi, Seat, Škoda and Ford, Mazda, Volvo.
• Pullers of the KL-0174-.. Series for pulling standard wheel bearings as well as pressing out bonded and stuck cardan shafts.
• Hooks KL-0049-360 A for pulling of wishbones from the suspension joint clamping hole.
• Wheel bearing tool kits of the KL-0039-.. series for pressing out and in of nearly all standard wheel bearings and wheel hubs.
Silent block tool sets with centering and thrust rings as well as guide pins from the KL-0039-.. series for pressing out and pressing in silent blocks and joints bearings.
• Pressing devices of the KL-0326-1.. series for pressing out and in support/guide joints; for example, on Mercedes and VW T4.
• Pressing devices of the KL-0610-1.. series for pressing out and in silent blocks on rear axle trailing arms; for example, on Ford, Mazda, Volvo.
• Wheel bearing tool KL-2211-111.. for pulling stuck screwed wheel bearing units; for example, on Subaru.
• Holding device KL-0115 for counterholding wheel hubs when loosening and tightening the wheel bearing central bolt.
• Pullers of the KL-0042-9.. series for pulling stuck wheel bearing inner races on the wheel hub.
• Clamping plier KL-0121-96.. to compress lug clamps and locking of stepless hose clips.
• Forcing tool of the KL-0165-.. series for separating ball joint connections on steering and axle systems.
• Eccentric spanner KL-0167-30 A for loosening and tightening inner tie bar joints or axial joints.
• Disassembly fork KL-0190-12 to check bearing and joint connections on vehicle axes, and to disassemble various parts.
Thread reset tool KL-0173-6.. A for reshaping damaged stud bolt threads on the wheel bolting.
• "GEDORE" bottle opener for the professional opening of thirst quenchers with crown caps.