Supplementary set for van wheel bearings, MB/VW
KL-4999-2504 EA
3550222
Suitable for wheel bearing units without centre bore on the front axle and for conventional wheel bearings with wheel hub on the front and rear axles of Mercedes and VW vehicles.
Suitable for lower suspension joints on the front axle wishbones of Mercedes and VW vehicles.
• For the professional removal and installation of wheel bearing units and wheel bearings
• For the professional removal and installation of the lower suspension joints
• Removal and installation directly on the vehicle
• No need to loosen other axle parts
• No wheel alignment required
• No need to replace the entire steering knuckle
• Additional drive parts required! (included in KL-4999-250)
• With MODULO 250, same area of application as: KL-0041-521 K, KL-0041-522 K, KL-0041-5040, KL-0039-7533
Mercedes Sprinter I (B901 / B902 / B903 / B904 / B905)
Mercedes Sprinter II (B906)
Mercedes Sprinter III (B907 / B910)
Mercedes Vito / Viano II (W639)
Mercedes Vito / V-Klasse III (W447)
VW Crafter I (2E / 2F)
VW LT II (2D)
1x KL-0041-5001 - Base plate
1x KL-0041-5002 - Support rod, cross hole
2x KL-0041-5009 - Support rod, 275 mm
3x KL-0041-5006 - Collar nut, M18
1x KL-0041-5010 - Adapter , 2¼"-14 UNS to M42x2
4x KL-0041-5004 - Washer, Ø 19 mm
1x KL-0041-5012 - Steering knuckle retaining bracket
2x KL-0041-5005 - Cylinder screw, M14 x 70
1x KL-0041-5003 - Screw with cone, M16x1,5
1x KL-0041-5014 - Screw with cone, M12
1x KL-0041-5040 - Upgrade kit Sprinter/Crafter (rear-wheel drive)
1x KL-0041-5008 - Reinforcement slat, 196 mm
1x KL-0041-5013 - Clamping nut
1x KL-0041-5030-2 - Closing plate, Ø 92 mm
2x KL-0041-5025 - Retaining pin
1x KL-0041-503 - Pull / pressure plate, Ø 92 mm
1x KL-0039-1352 - Centring ring, Ø 52 mm
1x KL-0039-1920-4 - Clamping nut, Ø 38 mm, M20
1x KL-0039-1350 - Centring ring, Ø 50 mm
1x KL-0039-1403 - Housing
1x KL-0039-1290 - Thrust ring, Ø 90 mm
1x KL-0039-1270 - Thrust ring, Ø 70 mm
1x KL-0039-1291 - Thrust ring, Ø 91 mm
1x KL-0041-5041 - Clamping nut
1x KL-0039-1501 - Centring ring
1x KL-0039-7533 - Sleeve set, MB Sprinter / VW Crafter
1x KL-4999-2504-9 A - Foam insert
KL-4999-2504 E
3441504
- Description
- Accessoires
- Technical data
- Manual
- Consists of
- Spare parts
- Similar
- Eigenschappen Fabrikant
- Documenten
- Certificaten
- Videos
- Handleidingen
- Tekeningen
- Deeplink
- Extra informatie
- Cross selling
